So, it’s yet another scorching hot Phoenix, Arizona Summer day. You’re ready to jump in your beautiful swimming pool. But oh no, the pool pump is making a really weird noise. Now what?

If you have any of the following common pool equipment problems, you’ll want a professional pool equipment repairman to fix it.

Now, let’s begin with some of the most common types of pool equipment repairs you’ll find here in Arizona’s Valley of the Sun.

Pool Pump Problems

Your pool’s pump is an essential piece of equipment that keeps the water circulating. It’s kind of like what a heart is to the human body. So, without a properly functioning pump, your pool can become an unsightly and unhealthy mess.

Motor Failure

Your pool’s pump motor can fail for many reasons. These can include overheating, voltage issues, or just old age. Is your pool pump making strange noises? Does it not turn on at all? These are signs the motor might be on its way out. When this happens, hire a professional like, Accent Pool/Spa Service to diagnose and fix it.

Impeller Issues

The impeller is a very important part of your pool pump. It spins to move water. If your impeller gets clogged or damaged, this can cause huge problems for your pool. And at first, you might simply notice a weaker water flow. You may also find that your pool might not be as clean as  before. When this happens, call a professional pool equipment repair company to check the impeller for leaves or other debris. In some cases, your impeller may need to be replaced.

Leaks

Pool pump leaks are a fairly common occurrence, which  can lead to water being wasted. To confirm a pump leak, check to see if there is water around the pump. Typical leak spots are the pump housing and fittings. If you suspect that a pump leak may be present, hire a professional to find the leak and fix it fast. Fixing it may involve a sealant or replacement parts.

Filter Issues

Pool filters keep your water clean. That’s because they’re designed to trap dirt and debris. The different types of filters include sand, cartridge and DE. So, when your pool filter is dirty of damaged, it can lead to several issues, including decreased water flow, high water pressure, cloudy water, and increased risk of bacteria and algae growth.

Filter Pressure Problems

It goes without saying that your pool’s filter pressure should be normal. High pressure often means a clogged filter. Low pressure could mean there are air leaks. When trying to determine the root cause of your pool filter pressure issue, have a professional evaluate your system.

Filter Media Replacement

From time to time, it may become necessary to replace your pool filter’s media. Sand filters need new sand. Cartridge filters need new cartridges. DE filters need new DE powder. Changing the media keeps the filter functioning properly. If you are unsure or hesitant to do this yourself, contact a pool repair professional such as Accent Pool/Spa Service.

Cracks and Leaks

Did you know that your pool’s filter housing can crack? Extremely cold or hot weather and/or old age, are usually to blame for cracked pool filter housing. Big cracks might mean you need to replace the filter.

Heater Headaches

Gas, electric and heat pump, pool heaters let you swim even during the Winter here is the Valley, when it’s chilly. But what if your heater won’t turn on?

Ignition Problems

Gas heaters use a pilot light or igniter. These can fail. Check the pilot light first. If it’s out, it can be relit. If the igniter is faulty, it should be replaced.

Thermostat Troubles

The thermostat controls the water temperature. If it’s off, the water might be too hot or cold. The thermostat can be recalibrated if needed. If that doesn’t work, a new one might be needed. A good thermostat can save on energy consumption.

Corrosion and Leaks

You should know that heaters can corrode over time. Chemical imbalances are the primary cause. Leaks are another sign of damage. Accent Pool/Spa Service can find the leak and repair it. Sometimes, a new heater is necessary.

Plumbing Problems

Plumbing moves water around the pool. It’s like the veins of your pool system. Problems stop proper water flow.

Leaks

Underground leaks can be difficult to locate. Root intrusion or ground movement is a common culprit. Observing wet spots around the pool is a red flag. Call a professional to find and fix these leaks.

Clogs

Skimmers and returns can get clogged with leaves, toys and debris. Use a skimmer net to remove surface debris. A garden hose can sometimes flush out clogs. If that doesn’t work, call a professional such as Accent Pool/Spa Service.

Valve Issues

Valves control water flow. They can leak or break. Worn seals may need to be replaced in order to fix valve leaks. A completely broken valve would also need replacing. This is a job best left to a professional.

Pool Automation System Glitches

Automation systems make pool care easier. They control everything, but can also mess things up when not functioning properly.

Control Panel Issues

The control panel can have problems. Power surges or software glitches cause issues. Try restarting the system first. If issues persist, call a professional pool repair technician.

Sensor Failures

Sensors measure water chemistry. Corrosion or calibration issues can cause problems. Faulty sensors may need to be replaced to keep your water balanced and efficient.

Integration Problems

Automation systems connect to smart homes. Sometimes, they don’t play well together. You may need a professional to check compatibility settings and assist you in getting updated software if needed.

The Bottom Line

We’ve covered common pool equipment repairs. Pumps, filters, heaters, plumbing, and automation systems were reviewed. Regular maintenance is key. Preventing problems saves money. Find a reliable professional repair service such as Accent Pool/Spa Service.